EasyManuals Logo

Dell POWERVAULT MD3600F User Manual

Dell POWERVAULT MD3600F
318 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #189 background imageLoading...
Page #189 background image
Configuration: Premium Feature— Remote Replication 189
Snapshot Virtual Disk With Remote Replication
A snapshot virtual disk is a point-in-time image of a virtual disk. In a remote
replication, do not mount a snapshot virtual disk on the same server as the
primary virtual disk.
Virtual Disk Copy With Remote Replication
The virtual disk copy premium feature copies data from a source virtual disk
to a target virtual disk within the same storage array.
A primary virtual disk in a remote replication can be either a source virtual
disk or a target virtual disk in a virtual disk copy.
You can create a virtual disk copy on the primary virtual disk in a replicated pair,
but you cannot create a virtual disk copy of a secondary virtual disk in a replicated
pair. Instead, you can copy a secondary virtual disk in one of two ways:
Promote the secondary virtual disk to the primary role.
CAUTION: If a primary/secondary role reversal is begun while a virtual disk copy
is in progress, the virtual disk copy fails and be unable to restart.
Create a snapshot virtual disk of the secondary virtual disk, then perform a
virtual disk copy of the snapshot virtual disk.
Virtual Disk Expansion With Remote Replication
Virtual Disk Expansion (VDE) increases the capacity of an existing virtual
disk. This increased capacity is achieved by using the free capacity available
on either:
The disk group of the standard virtual disk, or
The snapshot repository virtual disk.
Performing a VDE operation does not interrupt access to data on disk groups,
virtual disks or physical disks.
A VDE operation can be performed on a primary virtual disk or a secondary
virtual disk of a replicated pair. It cannot be performed on a replication
repository virtual disk. No other action can be performed on a virtual disk
while it is undergoing expansion (except normal disk I/O).
NOTE: To perform a VDE operation, the remote replication must be in Optimal
status. The properties pane in the logical view displays the status of a virtual disk.
book.book Page 189 Friday, September 23, 2011 2:46 PM

Table of Contents

Other manuals for Dell POWERVAULT MD3600F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell POWERVAULT MD3600F and is the answer not in the manual?

Dell POWERVAULT MD3600F Specifications

General IconGeneral
HDD speed15000 RPM
RAID levels0, 1, 5, 6, 10
Data transfer rate8 Gbit/s
Storage drive size3.5 \
Storage drive capacity600 GB
Storage drive interfaceSerial Attached SCSI (SAS)
Storage drives installedYes
Installed storage drive typeHDD
Supported storage drive typesHDD & SSD
Total installed storage capacity3.6 TB
Maximum supported storage capacity36 TB
Number of storage drives installed6
Number of storage drives supported12
Chassis type-
Product colorGray
LED indicatorsPower, Status
AC input voltage90-264 V
AC input frequency47/63 Hz
Number of power supply units1
Power supply unit (PSU) capacity600 W
Operating altitude-16 - 3048 m
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth561 mm
Width446.3 mm
Height86.8 mm
Weight29300 g

Related product manuals