EasyManuals Logo
Home>Dell>Storage>POWERVAULT MD3600F

Dell POWERVAULT MD3600F User Manual

Dell POWERVAULT MD3600F
318 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
Configuration: Premium Feature—Virtual Disk Copy 169
11
Configuration: Premium Feature—
Virtual Disk Copy
NOTE: A virtual disk copy overwrites data on the target virtual disk. Before starting
a virtual disk copy, ensure that you no longer need the data or back up the data on
the target virtual disk.
NOTE: If you ordered this feature, you received a Premium Feature Activation card
that shipped in the same box as your Dell PowerVault MD storage array. Follow the
directions on the card to obtain a key file and to enable the feature.
NOTE: The preferred method for creating a virtual disk copy is to copy from a
snapshot virtual disk. This allows the original virtual disk used in the snapshot
operation to remain fully available for read/write activity while the snapshot is used
as the source for the virtual disk copy operation.
When you create a virtual disk copy, you create a copy pair that has a source
virtual disk and a target virtual disk on the same storage array.
The source virtual disk is the virtual disk that contains the data you want to
copy. The source virtual disk accepts the host I/O read activity and stores the
data until it is copied to the target virtual disk. The source virtual disk can be
a standard virtual disk, a snapshot virtual disk, or the source virtual disk of a
snapshot virtual disk. When you start a virtual disk copy, all data is copied to
the target virtual disk, and the source virtual disk permissions are set to read-
only until the virtual disk copy is complete.
The target virtual disk is a virtual disk to which you copy data from the source
virtual disk. The target virtual disk can be a standard virtual disk, or the
source virtual disk of a failed or disabled snapshot virtual disk.
After the virtual disk copy is complete, the source virtual disk becomes
available to host applications for write requests. To prevent error messages, do
not attempt to access a source virtual disk that is participating in a virtual disk
copy while the virtual disk copy is in progress.
book.book Page 169 Friday, September 23, 2011 2:46 PM

Table of Contents

Other manuals for Dell POWERVAULT MD3600F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell POWERVAULT MD3600F and is the answer not in the manual?

Dell POWERVAULT MD3600F Specifications

General IconGeneral
HDD speed15000 RPM
RAID levels0, 1, 5, 6, 10
Data transfer rate8 Gbit/s
Storage drive size3.5 \
Storage drive capacity600 GB
Storage drive interfaceSerial Attached SCSI (SAS)
Storage drives installedYes
Installed storage drive typeHDD
Supported storage drive typesHDD & SSD
Total installed storage capacity3.6 TB
Maximum supported storage capacity36 TB
Number of storage drives installed6
Number of storage drives supported12
Chassis type-
Product colorGray
LED indicatorsPower, Status
AC input voltage90-264 V
AC input frequency47/63 Hz
Number of power supply units1
Power supply unit (PSU) capacity600 W
Operating altitude-16 - 3048 m
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth561 mm
Width446.3 mm
Height86.8 mm
Weight29300 g

Related product manuals