Dell POWERVAULT MD3600F User Manual

Configuration: Premium Feature— Remote Replication 217
Disabling the Remote Replication Premium Feature
Before disabling the Remote Replication premium feature, all remote virtual
disk replications must are removed on the storage array. See "Disabling the
Remote Replication Premium Feature" on page 217.
NOTE: To re-enable the Remote Replication premium feature on a storage array
after it is disabled, you must either retrieve the premium feature key or obtain a new
one from your Dell support representative.
To disable the remote replication premium feature:
1
In the Array Management Window , select Storage Array >
Premium Features
.
The
Premium Features and Feature Pack Information screen is displayed.
2 Select Remote Replication in the Premium Features window, then
click
Disable .
A warning message is displayed.
3 If you are sure you want to disable the Remote Replication feature, click
Yes to confirm.
The Remote Replication premium feature is disabled.
book.book Page 217 Friday, September 23, 2011 2:46 PM

Dell POWERVAULT MD3600F Specifications

General

HDD speed	15000 RPM
RAID levels	0, 1, 5, 6, 10
Data transfer rate	8 Gbit/s
Storage drive size	3.5 \
Storage drive capacity	600 GB
Storage drive interface	Serial Attached SCSI (SAS)
Storage drives installed	Yes
Installed storage drive type	HDD
Supported storage drive types	HDD & SSD
Total installed storage capacity	3.6 TB
Maximum supported storage capacity	36 TB
Number of storage drives installed	6
Number of storage drives supported	12
Chassis type	-
Product color	Gray
LED indicators	Power, Status
AC input voltage	90-264 V
AC input frequency	47/63 Hz
Number of power supply units	1
Power supply unit (PSU) capacity	600 W
Operating altitude	-16 - 3048 m
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	561 mm
Width	446.3 mm
Height	86.8 mm
Weight	29300 g