Delta ASDA Series User Manual

ASDA Series Application Note Introduction of PR Operation
March, 2015 1-9
Monitoring variables can be set via Status Monitor in ASDA-Soft. The Status Monitor window has
organized 5 groups of monitoring variables in the same section. The setting steps are shown
below.
1. Select the monitoring variables to be set.
2. Use the drop-down list to select the monitoring variables user wishes to observe.
3. Click on Change to modify the setting.
Figure 1.12 Use Status Monitor to Configure Monitoring Variables
Monitoring groups from #1 to #4 can be observed via PC scope. This can be done by selecting
the items from the drop-down list of each channel. See Figure 1.13.
Figure 1.13 Use PC Scope to Observe Monitoring Variables

Delta ASDA Series Specifications

General

Brand	Delta
Model	ASDA Series
Category	Servo Drives
Language	English