Digi XBee3 802.15.4 User Manual

AT commands SPI interface commands
Digi XBee3® 802.15.4 RF Module User Guide
106
Parameter range
0 - 1, 4, 5
Parameter Description
0 Disabled
1
SPI_SSEL
2 N/A
3 N/A
4 Digital output, low
5 Digital output, high
Default
1
P8 command
Sets or displays the DIO18/SPI_CLK configuration (Micro pin 13/SMT pin 14). This only applies to
surface-mount and micro devices.
Parameter range
0, 1, 4, 5
Parameter Description
0 Disabled
1 SPI_CLK
2 N/A
3 N/A
4 Digital output, low
5 Digital output, high
Default
1
P9 command
Sets or displays the DIO19/SPI_ATTN configuration (Micro pin 11/SMT pin 12). This only applies to
surface-mount and micro devices.
Parameter range
0, 1, 4, 5

Digi XBee3 802.15.4 Specifications

General

Brand	Digi
Model	XBee3 802.15.4
Category	Control Unit
Language	English