Digi XBee3 802.15.4 User Manual

Digi XBee3® 802.15.4 RF Module User Guide
XBee3 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to
devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-
to-peer networking. They are designed for high-throughput applications requiring low latency and
predictable communication timing.
The XBee3 802.15.4 RF Module supports the needs of low-cost, low-power wireless sensor networks.
The devices require minimal power and provide reliable delivery of data between devices. The devices
operate within the ISM 2.4 GHz frequency band.
The XBee3 802.15.4 RF Module uses XBee3 hardware and the Silicon Labs EFR32 chipset. As the name
suggests, the 802.15.4 module is over-the-air compatible with our Legacy 802.15.4 modules (S1 and
S2C hardware).
For information about XBee3 hardware, see the XBee3 RF Module Hardware Reference Manual.
Applicable firmware and hardware 12
Change the firmware protocol 12
Regulatory information 12
Digi XBee3® 802.15.4 RF Module User Guide
11

Digi XBee3 802.15.4 Specifications

General

Brand	Digi
Model	XBee3 802.15.4
Category	Control Unit
Language	English