Digi XBee3 802.15.4 User Manual

OTA firmware upgrade process for 802.15.4 ZCL message output
Digi XBee3® 802.15.4 RF Module User Guide
168
ZCL message output
By default ZCL messages are not printed to the UART on the client. To see these messages, set AZ
(Extended API Options) to 2. ZCL messages received by the server are always printed to the UART.
Image Notify
The server sends the Image Notify message to the client informing the device of the presence of an
update image. The Image Notify message is sent when the upgrade process is initiated from the
server.

Digi XBee3 802.15.4 Specifications

General

Brand	Digi
Model	XBee3 802.15.4
Category	Control Unit
Language	English