Digi XBee3 802.15.4 User Manual

AT commands UART interface commands
Digi XBee3® 802.15.4 RF Module User Guide
99
Parameter Description
0x0 1200 b/s
0x1 2400 b/s
0x2 4800 b/s
0x3 9600 b/s
0x4 19200 b/s
0x5 38400 b/s
0x6 57600 b/s
0x7 115200 b/s
0x8 230400 b/s
0x9 460,800 b/s
0xA 921,600 b/s
Default
3 (9600 baud)
NB command
Set or read the serial parity settings for UART communications.
The device does not actually calculate and check the parity. It only interfaces with devices at the
configured parity and stop bit settings for serial error detection.
Parameter range
0 - 2
Parameter Description
0 No parity
1 Even parity
2 Odd parity
Default
0
SB command
Sets or displays the number of stop bits for UART communications.
Parameter range
0 - 1

Digi XBee3 802.15.4 Specifications

General

Brand	Digi
Model	XBee3 802.15.4
Category	Control Unit
Language	English