29 Installation and Service Guide
Using the E-35A
Using the E-35A
The following user interfaces are available for the E-35A:
• Fiery QuickTouch on the front of the E-35A
Fiery QuickTouch is a seven-inch LCD color touch screen interface for the E-35A.
• The printer touch panel
• Fiery NX Station, including a monitor, keyboard, and mouse.
Note: The Fiery NX Station (monitor, mouse, and keyboard) is provided as an optional feature.
Fiery Ticker
When you log on to the E-35A using the monitor or Remote Desktop Connection, Fiery Ticker automatically starts
showing the status bar.
Figure 10: Fiery Ticker status bar
You can perform the following tasks using the Fiery Ticker:
• Monitor the activities of the E-35A and printer using the Fiery Notes.
• Manage the E-35A by using Command WorkStation or WebTools
• Shut down, restart, or reboot the E-35A
For details, see the Fiery Ticker Help. To access the Fiery Ticker Help, click “>>” icon at the upper left corner of the
screen, and select Help.
Printing E-35A pages from the monitor, keyboard, and mouse
This section describes how to print the Test Page, Server Configuration page, and other Fiery pages.
• Test Page verifies that all components of the E-35A to printer interface work. The Test Page is a pre-stored page
stored on the E-35A hard disk drive.
Note: Information regarding Test Page refers to PS Test Page or PCL Test Page. For more information, see
Configuration and Setup, which is part of the user documentation set.
• Server Configuration page provides general information about the hardware and software configuration of the E-
35A, the customer’s current settings for Setup, the current calibration, and the IP address of the E-35A.
Printing the Server Configuration page can be helpful during installation, Setup, and service. After installing the E-
35A (including connecting to the network) and before default settings are changed in Run Setup, you can obtain a
record of the defaults by printing the Server Configuration page.
To Next Page
Loading...
Need help?
General
