45 Installation and Service Guide
Replacing Parts
Replacing Parts
Generally, the E-35A requires no regular service or maintenance. Use the procedures in this chapter to inspect,
remove, reseat, and replace major hardware components.
Overview
This chapter includes information about servicing the following components:
• Boards and cables
• Fiery QuickTouch display module
• Motherboard components (DIMMs, CPU, and battery)
• Fan
• Power supply
• Hard disk drive
Replacement parts are available from your authorized service/support center. The terms “replace” and “replacing” are
used throughout this document to refer the re-installation of existing components. Install new components only when
necessary. If you determine that a component you removed is not faulty, reinstall it.
For a list of the tools required to service the E-35A, see “Tools you will need” on page 10.
For information about the monitor, keyboard, and mouse, see the documentation that accompanies those products.
Caution:When servicing the E-35A, follow “Precautions” on page 10.
To Next Page
Loading...
Need help?
General
