FLEX-6000 Signature Series – Maestro User Guide
Page 20
Copyright 2019 FlexRadio Systems. All Rights Reserved.
The configuration details of the Wi-Fi and wired network interfaces are displayed. The default
configuration for each interface is to use Dynamic Host Control Protocol (DHCP) to configure the
interface. If a static configuration is needed, tap the Static button and enter the parameters in the
IP Address, Mask and Gateway fields, then tap Apply. Each interface can be configurated
independently.
See section 30.5, Network Tab for more information about Maestro network connections and the
Wi-Fi Settings button.
4.7 NETWORK STATUS
When Maestro starts, the user has a choice of the Choose a Wi-Fi Network, Select Radio and Select a
Version startup screens. Each of these screens includes information about the network connection
that Maestro has made or is attempting to make. This information is shown by an icon in the lower
left corner of each of these screens.
The icon provides status information about a wired Ethernet connection, a wireless Wi-Fi connection
and the Maestro server (which provides Maestro software for installation). Tap the icon to display
text that provides more information. Some examples of the network status icon follow:
To Next Page
Loading...
Need help?
General
