To Next Page

To Previous Page

FLEX-6000 Signature Series – Maestro User Guide

Page 57

• Change Slice A to SAM (This loads the default linked MIC profile Default)

• Load Default PR781 Mic profile. (This Mic profile is now linked to the AM/SAM mode group)

• Change Slice A to LSB or USB. (This loads the Default FHM-1 Mic profile)

• Change Slice A to AM or SAM. (This loads the Default PR781 Mic profile)

When any value associated with a selected MIC profile is changed but not saved, an asterisk (*) will

appear before the profile’s name in the Profiles control panel. If a different profile is selected, either

by use of the control panel or by selecting a different transmit mode, the changes will be lost if not

saved before changing the MIC profile. Use the Save button in the Profiles control panel to save

changes to modified profiles.

MIC profiles are band-independent. A MIC profile that is associated with a mode will invoke the same

values in any band in which it is used.

NOTE: If a MIC profile is modified, the change will affect all MODES and Global profiles with

which the MIC profile is associated.

14.2 TRANSMIT PROFILES

Transmit profiles manage the transmitter power and interlock settings. The power settings are saved

by band, while the interlock settings apply to all bands. The power settings include the transmitter

power level, tune power level, ALC, and transverter tune and power levels. The interlock settings

include the TX Delay, PTT Timeout, and the controls for the various transmitter engaged signals. A

complete list of the settings is provided in section 14.7, Comparing Profiles and Persistence.

NOTE: Power settings are saved for every band in a Transmit profile. To save the appropriate

power settings set a Slice as the TX Slice. Tune to every band in which you want to save a power

setting and change the setting. When this is done save the Transmit profile.

The Transmit profile can be selected from the Profiles control panel in the Maestro Main Menu. Tap

the name of the desired profile, then tap the Load button.

Transmit profiles are linked to the TX Antenna setting in the transmit Slice. When the antenna used

by the transmit Slice is changed, the Transmit profile associated with the new antenna selection is

invoked. For example:

• Slice A is the transmit Slice. TX ANT is ANT1

• Slice B is NOT the transmit Slice. TX ANT is ANT2

• Load SO2R_TX1 Transmit profile. (This Transmit profile is now automatically linked to ANT1)

• Set Slice B as the transmit Slice.

• Load SO2R_TX2 Transmit profile. (This Transmit profile is now automatically linked to ANT2)

• Set Slice A as the transmit Slice. (This loads the SO2R_TX1 Transmit profile)

• Change Slice A TX ANT to ANT2. (This loads the SO2R_TX2 Transmit profile)

To associate a Transmit profile with a TX antenna, select the TX Antenna you wish to associate in the

transmit Slice, then load or save a Transmit profile using the Profiles control panel in the Main Menu,

or select an existing Transmit profile using the menu.

FlexRadio FLEX-6000 Signature Series User Manual

Questions and Answers: