FLEX-6000 Signature Series – Maestro User Guide
Page 83
Copyright 2019 FlexRadio Systems. All Rights Reserved.
19.2 MEMORY CHANNELS
FM settings can be stored in the Memory form accessible on the Memory tab of the Main Menu.
The memory form, as shown below, stores the memory frequency along with other settings such as
the mode, CTCSS tone, etc. Although this feature is optimized for use in FM mode, it can be used in
any mode.
The memory form allows individuals to create lists that can be shared with others. For example, your
local club may produce a list of frequencies all with a common "group" name. This group of channels
can be independently exported and imported using SmartSDR for Windows.
To create a memory entry, adjust the settings of the radio as you want them to be recorded, then
click the Add button. The new entry will appear in the memory screen.
To invoke a stored setting, open the Memory screen, click on the desired entry, then click the Load
button.
To delete a stored setting, open the Memory screen, click on the entry to be deleted, then click on
the Delete button.
The fields in a memory entry are defined as follows:
• Name - A unique name for this memory - Initially blank.
• Group - The combination of Group/Owner identifies a set for import when using SmartSDR
for Windows. When importing, the existing Group/Owner memories will be removed prior
to importing the new fields. This makes it easy for a user to keep a master list of memories
and distribute them and not have to worry about merging existing old data - initially blank.
• Owner - This is important for importing files and is typically the callsign of the person creating
the memory. This will be populated automatically when creating a new memory if a callsign
has been entered in Maestro.
• Frequency - The frequency to tune the Slice when selecting the memory. This will initially
be set to the Active Slice frequency when adding a memory.
To Next Page
Loading...
Need help?
General
