To Next Page

To Previous Page

FLEX-6000 Signature Series – Maestro User Guide

Page 58

Each Transmit profile saves a set of power settings, one setting for each band. To save power settings

for each band, select the Transmit profile from the drop-down menu, then tune to each band and

adjust the power settings. As the adjustments are made, an asterisk should appear before the

Transmit profile name in the drop-down menu, indicating that the Transmit profile has been

modified. When all bands of interest have been set, save the modified Transmit profile using the

Profiles control panel in the Main Menu.

NOTE: If a Transmit profile is modified, the change will affect all Global profiles with which the

Transmit profile is associated.

14.3 GLOBAL PROFILES

Global profiles manage the state of Panadapters and Slice Receivers and the layout of these

components on the Maestro display. Panadapter settings saved in Global profiles include the number

of Panadapters on the Maestro display, frequency ranges, bandwidth and scaling and display

parameters. Slice Receiver parameters include the frequency, mode, MIC profile, RX and TX filter

settings, DAX channel, audio gain and many others. See section 14.7, Comparing Profiles and

Persistence for details.

In addition, Global profiles also record the linking of each TX Antenna in each Slice to a Transmit

profile, and each Slice Receiver’s mode. Invoking a Global profile therefore creates a set of

Panadapters and Slices, selects a Slice to control the transmitter, then invokes the Transmit profile

indicated by the selected TX antenna and the MIC profile. Selection of a different Slice to control the

transmitter may change the selected Transmit and MIC profiles. Similarly, changes to the selected

TX antenna or mode within the transmit Slice may change the selected Transmit or MIC profiles.

To create or save a Global profile, configure all Panadapters and Slice Receivers to the desired

settings. TX Antennas and modes should be set to the desired values. Each TX Antenna that will be

used in the Global profile should be selected and then linked to a Transmit profile by selecting the

profile in the Profiles control panel. Select the mode and MIC profile in each Slice Receiver. When

these adjustments are complete, save the Global profile using the Profiles control panel.

Note that changes made to Panadapters and Slices are not automatically saved to a loaded Global

profile. Changes to existing Global profiles can only be made by manually re-saving the profile using

the Profile control panel.

14.4 SAVING AND DELETING PROFILES

The Profiles control panel is reached by tapping on the Menu button on the main display, then on

the Profiles tab on the Main Menu. On the Profiles control panel tap the Global, TX or MIC option

FlexRadio FLEX-6000 Signature Series User Manual

Questions and Answers: