To Next Page

To Previous Page

FLEX-6000 Signature Series – Maestro User Guide

Page 59

appropriate for the profile you wish to save or delete. This will bring up one of the following Profiles

control panels:

To save a new profile, tap the New Global Profile, New TX Profile or New MIC Profile text box. A

keyboard will appear. Type the desired name into the text box and tap Save. Saving a Global profile

saves the Panadapter settings, the CWX settings, and the Slice Receiver configuration. Saving a

Transmit or MIC profile will save only the settings related to the transmitter or microphone. See

section 14.7, Comparing Profiles and Persistence. for details.

Note: When creating a new global profile, it must have a TX and MIC profile associated with it.

At the time the new global profile is saved, if there isn’t a TX or MIC profile associated with the

global profile, new TX and MIC profiles are created having the same profile name as the global

profile.

Take care when creating a new MIC profile to ensure that the Slice Receiver that is selected to control

the transmitter also selects the mode to be associated with the new MIC profile. If this is not the

case, the new MIC profile may become associated with the wrong mode.

For the purpose of creating a MIC profile, LSB and USB are considered to be a single mode (SSB), as

are DIGU and DIGL (Digital), FM, NFM and DFM (FM) and AM and SAM (AM). Each Waveform

installed in the radio is treated as a separate mode.

To delete a profile, select the appropriate profile name and tap the delete button.

Note: Performing a database reset from the front panel of the radio will delete all non-default

profiles. It is recommended that you export your profiles with all options selected before

performing a database reset.

14.5 LOADING PROFILES

To load a profile from the Profiles control panel, select the desired profile and tap Load.

FlexRadio FLEX-6000 Signature Series User Manual

Questions and Answers: