Maintenance
170
Maintenance
10
Adjustments and Maintenance Procedures
Adjusting Paper Registration
Use Adjust Paper Registration to adjust the placement of the printed image on the page.
The adjustment allows you to place the top, bottom, left, and right margins exactly where
you want. You can specify the image position on both the front and back sides of the paper,
for each installed paper tray.
Depending on the machine settings, you may need to log in as the system administrator.
Verifying Paper Registration
1 Press the Home button.
2 Touch [Device] > [Support] > [Image Position].
3 Select the source paper tray for the registration print.
1) Touch [Paper Supply].
2) Touch the desired tray.
4 If your printer has automatic 2-sided printing, select the sides that you want to optimize.
To select a sample registration page for adjusting side 1, touch [Adjusted Side], then
touch [Side 1].
To select a sample registration page for adjusting both sides, touch [Adjusted Side], then
touch [Side 2].
5 Specify the consecutive number of sample pages to print.
1) Touch [Print Settings].
2) To increase or decrease the number of sample pages, for Quantity, touch the Plus icon
(+) or the Minus icon (-), then touch [OK].
6 To print the sample pages, touch [Print Sample].
7 When printing is completed, touch [Close].
To Next Page
Loading...
Need help?
General
