Device
77
Device
6
Supplies
See "Supplies" (P.94).
Billing/Usage
Selecting [Billing/Usage] allows you to check the billing information. The [Billing/Usage]
screen shows [Serial Number], [Counter] and [Usage Counters].
In the [Usage Counters] screen, you can check the detailed usage counters. You can filter
the counters by setting the filter (set to [All] by default) over the counter.
General
Measurements
Units
Allows you to select a unit of measurement displayed on the screen from [Millimeters] and
[Inches].
Paper Size Preference
Allows you to select the unit of default paper size to be used for printer settings.
To use the A4 size paper for the following printer settings by default and to set the [Units]
setting to [Millimeters], select [Metric].
To use the Letter size paper for the following printer settings by default and to set the
[Units] setting to [Inches], select [Inch].
Default paper size for printing
Default custom paper sizes displayed on the screen for each paper tray
Default paper size of each paper tray and the bypass tray
Date & Time
Set the date and time for the system clock of the machine. The date and time set here will
be printed on all lists and reports.
Set Automatically
Select this to set the date and time automatically according to the time server.
If you do not select this, you can set the time zone, date and time, and daylight saving time
manually.
Time Server (SNTP)
Tap this to set the time server.
Server Address
Enter a server address.
Time Zone
Sets the region and time zone.
Date & Time
Sets the date and time.
To Next Page
Loading...
Need help?
General
