Fuji Xerox DocuPrint P505 d User Manual

Removing Optional Components
175
Maintenance
10
Removing Optional Components
Important

To lift the printer, always use at least two people to grasp the hand holds on each side of the printer.

To prevent you from dropping the printer or injury, lift the printer firmly by gripping the recessed areas on
both sides of the printer. Never lift the printer by gripping any other areas.

If the optional 550-Sheet Feeder is not fixed to the printer securely, it could fall to the ground and cause
injury.
Removing the High-Capacity Feeder
This section describes how to remove the High-Capacity Feeder (optional).
Important

Close the bypass tray if opened.
1 Turn off the printer, and then unplug the power cable.
2 Remove the network cable, the USB cable, and the power cable from the printer.
3 Remove the power cable from the cable hook.
4 Take off the cable hook.

Fuji Xerox DocuPrint P505 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P505 d
Category	Printer
Language	English