Fuji Xerox DocuPrint P505 d User Manual

Device
85
Device
6
SMTP
Setup the SMTP server.
Once this screen is opened, searching SMTP server starts automatically. Select a server from
the search result.
Also you can specify the SMTP server by entering the server address manually.
Note

If SMTP is already enabled, the search is not performed automatically and the SMTP Server screen is
displayed.
Support
Displays the menu for maintenance of the machine.
Support Pages
Allows you to print reports.

[Ghosting Print]

[Repeating Defects]

[System Status]

[Error History Report]

[LDAP Communication Report]

[SMB Communication Report]

[SMTP Communication Report]
Altitude Adjustment
Specify the altitude of the location where the printer is installed.
Non-Fuji Xerox Toner Cartridges
Enable or disable the non-genuine toner mode.
Developer & Transfer Roller Cleaning
See "Performing a Developer and Transfer Roller Cleaning Procedure" (P.173).
Image Position
Adjust the image position.
Fusing Unit Temperature Adjustment
Adjust the temperature of the fusing unit.
To lower the temperature, set negative values. To increase, set positive values.
The default settings may not give the best output on all paper types. When the printed
paper has curled, try to lower the temperature. When the toner does not fuse on the paper
properly, try to increase the temperature.
Note

The print quality changes depending on the setting values you select for this item.

Fuji Xerox DocuPrint P505 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P505 d
Category	Printer
Language	English