Problem Solving
258
Problem Solving
11
Other Errors
This section describes the remedies when the following messages are displayed.
127-353
127-354
127-396
127-398
127-399
[Cause]
An error occurred in the machine.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
132-310
132-311
[Cause]
An error occurred in the machine.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
Error Message Cause and Remedy
A fault has occurred.
Switch off the machine.
(xxx-yyy)
[Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the
touch screen is blank, and then switch the machine
power on again.
If the message persists, record the content displayed
for [(xxx-yyy)]. Then immediately switch the power
off, make sure that the touch screen is blank, and
then contact our Customer Support Center.
Completed with an error.
(xxx-yyy)
[Cause]
An error occurred, and the operation terminated
abnormally.
[Remedy]
Execute the operation again.
Error
Code
Cause/Remedy