Furuno FS-1570 Service Manual

4-1
4.1 General
Table 4.1.1 shows the programs used by the radiotelephone.
Table 4.1.1 Program
Program Program number Remarks
T-CPU 0550205-01.xx FS-1570T (2570T) program
C-CPU 0550206-01.xx FS-2570C program
DSC MODEM 0550207-01.xx MODEM program for DSC
NBDP MODEM 0550208-01.xx MODEM program for NBDP
TERMINAL
(IB-583)
0550209-22.xx
NBDP terminal program for
FS-1570/FS-2570
TERMINAL
(IB-581)
0550210-22.xx
NBDP terminal program for
FS-1570/FS-2570
The program is updated by clicking the batch file icon or entering the batch command in
the DOS window.
Table 4.1.2 Program updating
Program Port to be used Command
Updating
time
Updating
speed
C-CPU FS-2570C [NBDP] port UPCONT.BAT 6 min.
T-CPU UPTRX.BAT 4 min.
DSC MODEM UPDSC.BAT 1 min.
NBDP MODEM
FS-1570T
FS-2570T
[REMOTE] port
UPNBDP.BAT 1 min.
38.4
kbps
TERMINAL*
(IB-583)
IB-583
[DTE] port or FDD
(depend on boot
program)
UP583.BAT 1 min.
57.6
kbps
UP581E.BAT**
(English)
1 min.
TERMINAL
(IB-581)
IB-581 FDD
UP581R.BAT**
(Russian)
1 min.
-
*: To change the language of IB-583:
English version: Turn power on while pressing [E]
Russian version: Turn power on while pressing [R]
**: To install from the system file of IB-581:
English version: Type “INSTALL”
Russian version: Type “RUSINST”
Chapter 4. Updating program

Furuno FS-1570 Specifications

General

Brand	Furuno
Model	FS-1570
Category	Telephone
Language	English