GE AV-300I User Manual

AV-300i Version 2 User’s Guide
—————— Function Description ——————
Ch.1
27
1.2.4 DriveID States (Drive ID Status)
This menu shows the Drive identification values.
Drive ID status
Drive cont curr Drive maximum continuos current rating
Drive size Drive size rating in kW of HP
Drive type Drive type (GE - 288)
Drive name Drive name set using GE toolbox
Actual setup Setup motor file in use
Software version Software version
Software type Software type factory use
Software status Software state factory use
Life time Drive life time accumulated with power on
Sys time - ddmmyy Time and date setting from PC tools or serial communications
NOTE! on the new regulation card the variable called “Sys time - ddmmyy” take the value:
time = 00:00:00 date = 010170
With PC tools or serial communication is possible to set this variable at the actual date and
time. After this operation the clock is active only when the Drive is powered on.
The size number is shown in the Drive Size table below.
Drive size - 6K Size number Drive size - DS Size number
0.75 KW - 0.75 Hp 0 250 Hp 2
1.5 KW - 1.5 Hp 1 300 Hp 3
2.2 KW - 2.0 Hp 2 350 Hp 4
3.0 KW - 3.0 Hp 3 400 Hp 5
4.0 KW - 5.0 Hp 4 450 Hp 6
5.5 KW - 7.5 Hp 5 500 Hp 7
7.5 KW - 10 Hp 6 600 Hp 8
11 KW - 15 Hp 7 700 Hp 9
15 KW - 20 Hp 8 800 Hp 10
22KW-25Hp 9
ai8080
30KW-30Hp 10
37KW-40Hp 11
45KW-50Hp 12
55KW-60Hp 13
75KW-75Hp 14
90 KW - 100 Hp 15
110 KW - 125 Hp 16
132 KW - 150 Hp 17
160 KW - 200 Hp 18
1.2.5 Alarm Register (Alarm Log)
This function provides storical list of Drive trips or various system error messages. Together with cause indica-
tions also time and date information is provided. This information is refered to variable “Sys time - ddmmyy”.
Example:
Sys time ddmmyy
03 : 11 : 42 010100
Undervoltage
Alarm type

GE AV-300I Specifications

General

Brand	GE
Model	AV-300I
Category	DC Drives
Language	English