GE AV-300I User Manual

AV-300i Version 2 User’s Guide
—————— Function Description ——————
Ch.1
75
1.6.5 Digital Output Block (Digital Outputs)
The Blocks of the digital outputs allow to turn an internal signal into a signal available on the terminal strip. In this
case too there are a series of standard outputs on the drive, referred as Std, and a series of outputs available on
the expansion cards, referred as Exp with a “X” suffix in the numeration sequence. As for the digital inputs, this
Block allows the output inversion.
The Drive is supplied with 4 standard digital programmable outputs referred as Std. With the expansion cards
it is possible to obtain 8 expanded digital programmable outputs referred as Exp with a “X” suffix.
The Block inputs are: · Digital output 0 src
· Digital output 1 src
· Digital output 2 src
· Digital output 3 src
Description:
I/O CONFIG Digital outputs
Std digital outs
Std dig out src
DO 0 src
DO 1 src
DO 2 src
DO 3 src
Std dig out cfg
DO 0 inversion
DO 1 inversion
DO 2 inversion
DO 3 inversion
Std dig out mon
DO 3210
Exp digital outs
Exp dig out src
DO 0X src
DO 1X src
DO 2X src
DO 3X src
DO 4X src
DO 5X src
DO 6X src
DO 7X src
Exp dig out cfg
DO 0X inversion
DO 1X inversion
DO 2X inversion
DO 3X inversion
DO 4X inversion
DO 5X inversion
DO 6X inversion
DO 7X inversion

GE AV-300I Specifications

General

Brand	GE
Model	AV-300I
Category	DC Drives
Language	English