GE Power Quality Meter Series User Manual

GE Power Management PQM Power Quality Meter 6-7
6 SOFTWARE 6.4 UPGRADING FIRMWARE
6
6.4 UPGRADING FIRMWARE 6.4.1 DESCRIPTION
To upgrade the PQM firmware, follow the procedures listed in this section.
Upon successful completion of this procedure, the PQM will have new firmware installed with the original set-
points.
The latest firmware files are available from the GE Power Management website at
YYY)'KPFWUVTKCNEQORO
.
6.4.2 SAVE/PRINT PQM SETPOINTS TO A FILE
1. To save setpoints to a file, select the
File > Save As
menu item.
2. Enter the filename to save the current setpoints and click
OK
. Use the extension ".pqm" for PQM setpoint
files.
3. To print setpoints or actual values, select the
File > Print Setup
menu item. Select one of
Setpoints (Enabled
Features)
,
Setpoints (All)
,
Actual Values
, or
User Definable Memory Map
and click
OK
.
4. Ensure the printer is setup and on-line. Select the
File > Print
menu item and click
OK
to print the setpoints
NOTE

GE Power Quality Meter Series Specifications

General

Brand	GE
Model	Power Quality Meter Series
Category	Measuring Instruments
Language	English