GE Power Quality Meter Series User Manual

GE Power Management PQM Power Quality Meter 5-31
5 MONITORING 5.5 A4 PRODUCT INFO
5
5.5 A4 PRODUCT INFO 5.5.1 SOFTWARE VERSIONS & MODEL INFORMATION
Figure 5–21: ACTUAL VALUES PAGE 4 – SOFTWARE VERSIONS
a) SOFTWARE VERSIONS
Product software revision information is contained in these messages.
MAIN PROGRAM VERSION:
When referring to documentation or requesting technical assistance from the
factory, record the
MAIN PROGRAM VERSION
and
MODIFICATION FILE NUMBER
. The
MAIN PROGRAM VERSION
identi-
fies the firmware installed internally in the flash memory. The title page of this instruction manual states the
main program revision code for which the manual is written. There may be differences in the product and man-
ual if the revision codes do not match.
BOOT PROGRAM VERSION:
This identifies the firmware installed internally in the memory of the PQM. This
does not affect the functionality of the PQM.
]] ACTUAL VALUES
]] A4 PRODUCT INFO
] SOFTWARE VERSIONS
]
MAIN PROGRAM
VERSION: 3.40
BOOT PROGRAM
VERSION: 1.10
]] ACTUAL VALUES
]] A1 METERING
ACTUAL
SUPERVISOR PROGRAM
VERSION: 1.02
] END OF PAGE A4
]
] MODEL INFORMATION
]
ORDER CODE:
PQM-T20-C-A
MOD NUMBER(S): 000
SERIAL NUMBER:
C6587777
DATE OF MANUFACTURE:
Oct 29 1998
DATE OF CALIBRATION:
Oct 29 1998
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE

GE Power Quality Meter Series Specifications

General

Brand	GE
Model	Power Quality Meter Series
Category	Measuring Instruments
Language	English