GE Power Quality Meter Series User Manual

GE Power Management PQM Power Quality Meter 8-3
8 DNP COMMUNICATIONS 8.1 DNP 3.0 PROTOCOL
8
8.1.2 IMPLEMENTATION TABLE
The table below lists all objects recognized and returned by the PQM. Additional information provided on the
following pages includes lists of the default variations and defined point numbers returned for each object.
DNP IMPLEMENTATION TABLE
OBJECT REQUEST RESPONSE
OBJ VAR DESCRIPTION FUNC CODES QUAL CODES
(hex)
FUNC CODES QUAL CODES
(hex)
1 0 Binary Input - All Variations 1 06
1 1 Binary Input 1 00, 01, 06 129 00, 01
1 2 Binary Input With Status (Note 6) 1 00, 01, 06 129 00, 01
2 0 Binary Input Change - All Variations 1 06, 07, 08
2 1 Binary Input Change Without Time 1 06, 07, 08 129 17, 28
2 2 Binary Input Change With Time 1 06, 07, 08 129 17, 28
10 0 Binary Output - All Variations 1 06
10 2 Binary Output Status 1 00, 01, 06 129 00, 01
12 1 Control Relay Output Block 3, 4, 5, 6 17, 28 129 17, 28
20 0 Binary Counter - All Variations 1, 7, 8, 9,10 06, 07, 08 129 00. 01
20 5 32-Bit Binary Counter Without Flag 1, 7, 8, 9, 10 06, 07, 08 129 00. 01
20 6 16-Bit Binary Counter Without Flag 1, 7, 8, 9, 10 06, 07, 08 129 00. 01
21 0 Frozen Counter - All Variations 1 06, 07, 08 129 00. 01
21 9 32-Bit Frozen Counter Without Flag 1 06, 07, 08 129 00. 01
21 10 16-Bit Frozen Counter Without Flag 1 06, 07, 08 129 00. 01
30 0 Analog Input - All Variations 1 06
30 1 32-Bit Analog Input With Flag 1 00, 01, 06 129 00, 01
30 2 16-Bit Analog Input With Flag 1 00, 01, 06 129 00, 01
30 3 32-Bit Analog Input Without Flag 1 00, 01, 06 129 00, 01
30 4 16-Bit Analog Input Without Flag 1 00, 01, 06 129 00, 01
32 0 Analog Input Change - All Variations 1 06, 07, 08
32 1 32-Bit Analog Input Change without Time 1 06, 07, 08 129 17, 28
32 2 16-Bit Analog Input Change without Time 1 06, 07, 08 129 17, 28
32 3 32-Bit Analog Input Change with Time 1 06, 07, 08 129 17, 28
32 4 16-Bit Analog Input Change with Time 1 06, 07, 08 129 17, 28
50 1 Time and Date 1, 2 07 (Note 1) 129 07
60 1 Class 0 Data (Note 2) 1 06 129
60 2 Class 1 Data (Note 3) 1 06, 07, 08 129
60 3 Class 2 Data (Note 3) 1 06, 07, 08 129
60 4 Class 3 Data (Note 3) 1 06, 07, 08 129
80 1 Internal Indications 2 00 (Note 4) 129
No object - Cold Start 13
No object - Warm Start (Note 5) 14
No object - enable unsolicited (parsed only) 20
No object - disable unsolicited (parsed only) 21
No object - Delay Measurement 23
1, 2, 3, 4, 5, 6: see the IMPLEMENATION TABLE NOTES on the following page.

GE Power Quality Meter Series Specifications

General

Brand	GE
Model	Power Quality Meter Series
Category	Measuring Instruments
Language	English