GE Power Quality Meter Series User Manual

GE Power Management PQM Power Quality Meter 9-5
9 COMMISSIONING 9.1 COMMISSIONING
9
S4 ALARMS/CONTROL continued
POWER FACTOR
POWER FACTOR LEAD 1 RELAY
POWER FACTOR LEAD 1 PICKUP
POWER FACTOR LEAD 1 DROPOUT
POWER FACTOR LEAD 1 DELAY sec.
POWER FACTOR LAG 1 RELAY
POWER FACTOR LAG 1 PICKUP
POWER FACTOR LAG 1 DROPOUT
POWER FACTOR LAG 1 DELAY sec.
POWER FACTOR LEAD 2 RELAY
POWER FACTOR LEAD 2 PICKUP
POWER FACTOR LEAD 2 DROPOUT
POWER FACTOR LEAD 2 DELAY sec.
POWER FACTOR LAG 2 RELAY
POWER FACTOR LAG 2 PICKUP
POWER FACTOR LAG 2 DROPOUT
POWER FACTOR LAG 2 DELAY sec.
DEMAND
PHASE A CURRENT DMD RELAY
PHASE A CURRENT DMD LEVEL A
PHASE B CURRENT DMD RELAY
PHASE B CURRENT DMD LEVEL A
PHASE C CURRENT DMD RELAY
PHASE C CURRENT DMD LEVEL A
NEUTRAL CURRENT DMD RELAY
NEUTRAL CURRENT DMD LEVEL A
3
Φ
POS REAL POWER DMD RELAY
3
Φ
POS REAL POWER DMD LEVEL kW
3
Φ
POS REACT POWER DMD RELAY
3
Φ
POS REACT POWER DMD LEVEL kvar
3
Φ
NEG REAL POWER DMD RELAY
3
Φ
NEG REAL POWER DMD LEVEL kW
3
Φ
NEG REACT POWER DMD RELAY
3
Φ
NEG REACT POWER DMD LEVEL kvar
3
Φ
APPARENT POWER DMD RELAY
3
Φ
APPARENT POWER DMD LEVEL kVA
Table 9–1: PQM SETPOINTS (Sheet 9 of 11)
S4 ALARMS/CONTROL continued
PULSE INPUT
PULSE INPUT 1 RELAY
PULSE INPUT 1 LEVEL units
PULSE INPUT 1 DELAY sec.
PULSE INPUT 2 RELAY
PULSE INPUT 2 LEVEL units
PULSE INPUT 2 DELAY sec.
PULSE INPUT 3 RELAY
PULSE INPUT 3 LEVEL units
PULSE INPUT 3 DELAY sec.
PULSE INPUT 4 RELAY
PULSE INPUT 4 LEVEL units
PULSE INPUT 4 DELAY sec.
TOTALIZED PULSES RELAY
TOTALIZED PULSES LEVEL units
TOTALIZED PULSES DELAY sec.
TIME
TIME RELAY
PICKUP TIME
DROPOUT TIME
MISCELLANEOUS
SERIAL COM1 FAILURE ALARM DELAY sec.
SERIAL COM2 FAILURE ALARM DELAY sec.
CLOCK NOT SET ALARM
DATA LOG 1 MEMORY FULL LEVEL sec.
DATA LOG 2 MEMORY FULL LEVEL sec.
Table 9–1: PQM SETPOINTS (Sheet 10 of 11)

GE Power Quality Meter Series Specifications

General

Brand	GE
Model	Power Quality Meter Series
Category	Measuring Instruments
Language	English