HEIDENHAIN iTNC 530 119
3.2 Creating and writing programs
The TNC search function
The search function of the TNC enables you to search for any text
within a program and replace it by a new text, if required.
Finding any text
If required, select the block containing the word you wish to find
Select the search function: The TNC superimposes
the search window and displays the available search
functions in the soft-key row (see table of search
functions)
Enter the text to be searched for. Please note that the
search is case-sensitive
Start the search process: The TNC displays the
available search options in the soft-key row (see the
table of search options)
If required, change the search options
Start the search process: The TNC moves to the next
block containing the text you are searching for
Repeat the search process: The TNC moves to the
next block containing the text you are searching for
End the search function
Search functions Soft key
Show the pop-up window containing the last
search items. Use the arrow keys to select a
search item and confirm with the ENT key.
Show the pop-up window containing possible
search items of the current block. Use the arrow
keys to select a search item and confirm with the
ENT key.
Show the pop-up window containing a selection
of the most important NC functions. Use the
arrow keys to select a search item and confirm
with the ENT key.
Activate the Search/Replace function
To Next Page
Loading...
Need help?
General
