Hitachi CB 520H B2 User Manual

Scope of support
The following scope of user authentication support.
Table 3-9 Communication destinations supported by local authentication
and LDAP authentication
Tools User authentication
Web console
1
N
HVM Navigator Y
LPAR manager screen
1
N
Virtual COM console
2
Y
LP web system Y
HVM management command (HvmSh)
2
Y
Legend:
Y: Supported
N: Not supported
Notes:
1. User authentication is required in the management module.
2. The initial setting of the user authentication is disabled.
User authentication settings
To set user authentication, perform the following operations:
Table 3-10 Web console
Item Operation
Setting the virtual COM
console
1
Resources > Modules > All Modules > Server Blades >
Server Blades x > LPAR > Edit > Edit virtual COM
console settings
Setting the LP CLI Resources > Modules > All Modules > Server Blades >
Server Blades x > LPAR > Edit > Edit LP CLI
Table 3-11 LPAR manager screen
Item Operation
Setting the virtual COM
console
1
System Configuration screen
> VC
2
Setting the LP CLI System Configuration screen
> LP CLI
2
High Reliability Functions
3-19
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide

Hitachi CB 520H B2 Specifications

General

Brand	Hitachi
Model	CB 520H B2
Category	Server
Language	English