Hitachi CB 520H B2 User Manual

Item Scope of support
• Authentication (LPAR manager firmware version
02-40 or later)
Logs for user authentication will be collected.
• Authentication and modification (LPAR manager
firmware version 02-55 or later)
In addition to the logs for user authentication,
the logs for user operations to change the
settings or status of LPAR manager or of an
LPAR will be collected.
Audit log settings
To set the audit log, perform the following operations:
Table 3-35 Web console
Item Operation
Audit log settings Resources tab > Modules > All Modules > Server Blades >
Server Blades x > LPAR manager tab > Edit button > Edit
syslog transfer settings
Table 3-36 HVM management command (HvmSh)
Item Command name
Audit log configuration
settings
opr AuditLogConfig
Registering a certificate for
an LPAR manager client or a
certificate authority
opr HvmClientCertificateRegist
Audit log format
The format of the audit log is explained below.
Table 3-37 Audit log format
Item Description
Priority Depending on the severity of the audited event, this
is displayed in the following format: <value>
<13>: Displays facility=user, severity=notice.
<14>: Displays facility=user, severity=info.
When an operation fails, <13> is output.
In all other cases, <14> is output.
Syslog version "1" is output.
High Reliability Functions
3-29
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide

Hitachi CB 520H B2 Specifications

General

Brand	Hitachi
Model	CB 520H B2
Category	Server
Language	English