LPAR manager Screen messages
Followings are the LPAR manager messages that appear on the console
screen when the processing for a screen operation has not concluded
normally.
Message Content
A NUMA configuration error has occurred.
Set the scheduling mode of processor to a value of
dedicated mode.
Explanation The guest NUMA configuration is invalid.
Make sure the scheduling mode of the processor is set to
dedicated mode.
LPAR manager
operation
Aborts the specified process.
What to do Make sure the scheduling mode of the processor is set to
dedicated mode.
Message Content
A user with the administrators role is required in the
system.
Explanation At least one user with the administrators role assigned is required
in the system.
LPAR manager
operation
Aborts the specified process.
What to do To execute this processing, assign the administrators role to a
different user.
Message Content Active LPAR Exist
Explanation The LPAR for which you tried to make a setting is active, so you
cannot make any settings now.
LPAR manager
operation
Aborts the specified process.
What to do Make the setting again after the LPAR has been deactivated.
Message Content All groups are already added.
Explanation No group can be added.
LPAR manager
operation
Aborts the specified process.
What to do Review the specified process.
Message Content All LPARs are already defined.
Explanation There is no LPAR left to be defined.
LPAR manager
operation
Aborts the specified process.
9-10
Messages
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
Need help?
General