Figure 5-40 VNIC Assignment Change Confirmation Screen
Assign Shared FCs to LPARs
Assign Shared FCs Configuration on the Shared FC Assignment Screen. See
Availability of Shared FC on page 10-12 for note.
• Scheduling device of PCI device which are Dedicated mode cannot be
assigned to LPAR on this screen.
• For an FCoE boot, you do not need to specify the shared FC settings.
1. Assign the shared FC to the LPAR on the Shared FC Assignment screen.
Place the cursor on the Shared FC# to assign to the LPAR, and press
Enter.
5-28
Setup of LPAR manager
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
Need help?
General