Hitachi CB 520H B2 User Manual

• The transfer data to an FTP server is supported only an IP address in IPv4
format.
LPAR manager Dump Collection Command
Outline of LPAR manager Dump Collection Command
LPAR manager dump is collected by executing an LPAR manager dump
collection command which is included in HVM management commands
(HvmSh). When the LPAR manager dump collection command is executed on
the LPAR manager management server, the LPAR manager performs LPAR
manager dump and transfers the collected dump data to the external FTP
serve specified in the LPAR manager dump collection command to save it as a
file. The figure below shows a schematic diagram when the LPAR manager
dump collection command is executed.
Figure 4-2 Memory Dump of LPAR manager
Table 4-2 Functions of LPAR manager Memory Dump
Item Function
Dump
collection
target
LPAR manager
Dump volume Up to 16 MB (The Gzip-compressed data size of two blocks of dump )
User
operation
method
Executes LPAR manager dump collection command on the LPAR manager
management server.
Dump output
server
External FTP server specified by the LPAR manager dump collection
command (The server that executes the LPAR manager dump collection
command is also available.)
Dump data
transfer
method
Memory dump data is transferred from the LPAR manager machine to
the external FTP server through the management LAN. The LPAR
manager dump data are compressed and a GZIP file is created by the
LPAR manager machine, and the file is transferred to the external FTP
server using the FTP protocol.
4-6
Maintenance Functions
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide

Hitachi CB 520H B2 Specifications

General

Brand	Hitachi
Model	CB 520H B2
Category	Server
Language	English