Hitachi CB 520H B2 User Manual

Table 3-29 HVM management command (HvmSh)
Item Command name
LDAP configuration settings opr LdapConfig
opr LdapPasswd
Security settings on the
destination for encrypted
communication
opr HvmIfSecureLevel
Settings on whether to
validate the certificate when
encrypted communication is
performed
opr HvmIfSecureVerify
Registration of the
certificate of the
communication destination
or the certificate of the
certificate authority
opr HvmClientCertificateRegist
RADIUS authentication
LPAR manager supports RADIUS authentication and local authentication.
This section explains the RADIUS authentication as supported by LPAR
manager.
Scope of support
The scope of support for RADIUS authentication is shown below.
Item Scope of support
RADIUS server type FreeRADIUS and the following Network Policy Servers are
supported:
• Windows Server 2008
• Windows Server 2008 R2
• Windows Server 2012
• Windows Server 2012 R2
• Windows Server 2016
Number of RADIUS
servers
Maximum of three LDAP servers (LDAP servers will be accessed in
the order of LDAP server 1, LDAP server 2, and LDAP server 3.
Authentication will be performed by using the server that responds
earlier than the other servers.)
User name and
password to be
registered on the
RADIUS server
The following are the requirements for user names and passwords
to be used for LPAR manager authentication:
• The user name must be 1 to 31 characters, and can contain
alphanumeric characters, periods (.), hyphens (-), and
underscores (_). The user name must begin with a letter.
• The password must be 1 to 31 characters, and can contain
alphanumeric characters and symbols other than spaces.
3-26
High Reliability Functions
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide

Hitachi CB 520H B2 Specifications

General

Brand	Hitachi
Model	CB 520H B2
Category	Server
Language	English