Item Support (version)
Oracle Database
12
Y (01-0X or later)
Notes:
1. The maximum amount of memory that can be allocated to LPAR is calculated by the
following formula: (maximum-amount-memory) - (amount-of-memory-used-by-
LPAR-manager)
2. The maximum amount of memory that can be allocated per LPAR is 4092 GB.
3. Only supported the Onboard-LAN (LOM) or the mezzanine card.
And only when the management tool is the deployment manager of HCSM.
4. Only supported a power control by way of WOL by SC/BSM and SC/DPM.
5. For supported status, see SR-IOV functions which LPAR manager supports.
6. For support status, see the Hitachi Command Suite Compute Systems Manager User
Guide.
7. CB 520X B1/B2/B3 does not support this item.
8. VF NIC view and settings are not supported.
9. VF NIC does not support this item.
10. N+M cold standby is supported only between same server blade models.
11. Unsupported when Emulex 10Gb 4 port Onboard LAN is enabled on CB 520X B1/B2/
B3.
12. Supported status differs depending on Oracle Database version.
Visit the following URL.
<Linux>
http://www.oracle.com/technetwork/database/enterprise-edition/tech-
generic-linux-new-086754.html
<Windows>
http://www.oracle.com/technetwork/jp/database/clustering/tech-generic-
windows-new-166584.html
13. Only CB 520X B1/B2/B3 supports this item.
14. For CB 520X B1, this item is supported by LPAR manager firmware versions 01-90
or later.
For CB 520X B2, this item is supported by LPAR manager firmware versions 02-27
or later.
15. Only Enterprise models are supported.
16. The FCoE functionality is supported only by onboard LANs (Emulex XE104).
17. There are some restrictions on supported functionality. For detailed restrictions, see
Differences in supported items depending on the guest OSs on page A-24
SR-IOV functions which LPAR manager supports
SR-IOV functions supported by LPAR manager are shown in the table below.
Setting Item Catalogue
A-17
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
Need help?
General