remaining iSCSI FC port of that blade. Once the targets are rezoned, the impact to iSCSI is the loss
of one 1 GbE port.
Figure 58 FCIP impact on existing iSCSI configurations – single fabric per blade
.
Figure 59 FCIP impact on existing iSCSI configurations — dual fabrics per blade
.
In the dual FC fabric case, the impact is higher because after adding an FCIP Route there is only one
remaining FC port available for iSCSI. Therefore, only the targets from one fabric or the other will be
available to iSCSI initiators connected to that MPX200 blade; access to targets on the other fabric
are through another MPX200 blade.
MPX200 Multifunction Router 103
To Next Page
Loading...
Need help?
General