MPX200 <1>(admin) #> lunmask remove
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 50:06:01:60:c1:e0:0d:a2,50:06:01:60:41:e0:0d:a2
1 50:06:01:60:c1:e0:0d:a2,50:06:01:68:41:e0:0d:a2
Please select a Target from the list above ('q' to quit): 0
Index (LUN/VpGroup) Vendor
----- ------------- ------
0 0/VPGROUP_1 DGC
1 1/VPGROUP_1 DGC
2 2/VPGROUP_1 DGC
3 3/VPGROUP_1 DGC
4 0/VPGROUP_2 DGC
Please select a LUN from the list above ('q' to quit): 0
Index Initiator
----- -----------------
0 iqn.1991-05.com.microsoft:server1
Please select an Initiator to remove ('a' to remove all, 'q' to quit): 0
All attribute values that have been changed will now be saved.
MPX200 <1>(admin) #>
Passwd
Changes the guest and administrator passwords.
Admin sessionAuthority
passwd
Syntax
Example:
MPX200 <1>(admin) #> passwd
Press 'q' and the ENTER key to abort this command.
Select password to change (0=guest, 1=admin) : 1
account OLD password : ******
account NEW password (6-128 chars) : ******
please confirm account NEW password : ******
Password has been changed.
Ping
Verifies the connectivity of management and GE ports. This command works with both IPv4 and IPv6.
Admin sessionAuthority
ping
Syntax
Example:
MPX200 <1>(admin) #> ping
A list of attributes with formatting and current values will follow. Enter a
new value or simply press the ENTER key to accept the current value. If you
wish to terminate this process before reaching the end of the list press 'q' or
MPX200 Multifunction Router 153
To Next Page
Loading...
Need help?
General