Displays detailed LUN information for a specified
target and LUN. See “show LUNinfo com-
mand” on page 172.
luninfo
Displays LUN mappings. See “show lunmask
command” on page 173.
lunmask
Displays information about LUNs and their targets.
See “show LUNs command” on page 172.
luns
Displays memory usage. See “show memory
command” on page 173.
memory
Displays the router’s management port (10/100)
configuration. See “show mgmt com-
mand” on page 174.
mgmt
Displays the router’s NTP configuration. See “show
NTP command” on page 174.
ntp
Displays information about the router's perform-
ance. See “show perf command” on page 175.
perf [ byte | init_rbyte |
init_wbyte | tgt_rbyte |
tgt_wbyte ]
Displays the targets presented by the router: FC,
iSCSI, or both. See “show presented targets
command” on page 176.
presented_targets [fc or iscsi]
Displays the router's properties. See “show prop-
erties command” on page 177.
properties
Displays the router’s SNMP properties and trap
configurations. See “show SNMP com-
mand” on page 177.
snmp
Displays the router's FC and iSCSI statistics. See
“show stats command” on page 178.
stats
Displays router product information, including the
serial number, software version, hardware version,
configuration, and temperature. See “show system
command” on page 180.
system
Displays the targets discovered by the router: FC,
iSCSI, or both. See “show targets com-
mand” on page 181.
targets [fc or iscsi]
Displays the VPGs. See “show VPGroups com-
mand” on page 181.
vpgroups [vpgroup index]
Show CHAP
Displays the CHAP configuration for iSCSI nodes.
NoneAuthority
show chap
Syntax
Command referencecommand reference166
To Next Page
Loading...
Need help?
General