show vpgroups
Lists the status and WWPN for each virtual port group (VP group).
The router’s Fibre Channel ports can present four virtual ports (if enabled) to zone with Fibre Channel
targets and allow the target to expose more LUNs to the router. The router provides the VP group by
combining virtual port entities from each Fibre Channel port. Every VP group consists of one virtual
port from each Fibre Channel port. Because there are four virtual ports per Fibre Channel port, there
are four VP groups.
Session: miguser
Example:
MPX200 <1> (miguser) #> show vpgroups
VpGroup Information
---------------------
Index 1
VpGroup Name VPGROUP_1
Status Enabled
WWPNs 21:00:00:c0:dd:12:f4:f2
21:00:00:c0:dd:12:f4:f3
Index 2
VpGroup Name VPGROUP_2
Status Enabled
WWPNs 21:01:00:c0:dd:12:f4:f2
21:01:00:c0:dd:12:f4:f3
Index 3
VPGroup Name VPGROUP_3
Status Enabled
WWPNs 21:02:00:c0:dd:12:f4:f2
21:02:00:c0:dd:12:f4:f3
Index 4
VpGroup Name VPGROUP_4
Status Enabled
WWPNs 21:03:00:c0:dd:12:f4:f2
21:03:00:c0:dd:12:f4:f3
MPX200 Multifunction Router 345
To Next Page
Loading...
Need help?
General