compare_luns add
Schedules a standalone LUN compare job. You can name the job and associate it with a job group.
Scheduling options include: immediately, at a pre-defined later time, or by serial scheduling. Serial
scheduling requires that you assign a priority to the job, which will be used to schedule it before
(lower priority value) or after (higher priority value) a specific job in the serial schedule queue.
Session: miguser
Example:
MPX200 <2> (admin) (miguser) #> compare_luns add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index WWPN, PortId Symbolic Name Target Type
----- --------------------------------- -------------------- ------------
0 20:78:00:c0:ff:d5:9a:05, 8c-01-ef HP MSA2012fc-0 Src+Dest
1 50:00:1f:e1:50:0a:37:18, 82-01-00 HP HSV210-3 Src+Dest
Please select a Source Target from the list above ('q' to quit): 1
Index (VpGroup Name)
----- --------------
1 VPGROUP_1
2 VPGROUP_2
3 VPGROUP_3
4 VPGROUP_4
Please select a VPGroup for Source Lun ('q' to quit): 1
LUN Vendor LUN Size( GB) Attributes
--- ------ -------------- ----------
1 HP 10.00 SRC LUN
2 HP 10.00
3 HP 20.00
4 HP 20.00
5 HP 10.00
6 HP 5.00
7 HP 5.00
8 HP 5.00
Please select a LUN as a Source Lun ('q' to quit): 1
Index WWPN, PortId Symbolic Name Target Type
----- --------------------------------- -------------------- ------------
0 20:78:00:c0:ff:d5:9a:05, 8c-01-ef HP MSA2012fc-0 Src+Dest
1 50:00:1f:e1:50:0a:37:18, 82-01-00 HP HSV210-3 Src+Dest
Please select a Destination Target from the list above ('q' to quit): 1
Index (VpGroup Name)
----- --------------
1 VPGROUP_1
2 VPGROUP_2
3 VPGROUP_3
Offline Data Migration316
To Next Page
Loading...
Need help?
General