show migration_luninfo
Provides the current status and path information for any array LUN. Use this command to check the
usability of a path in failover scenarios. The paths specified as passive are not used by data migration
jobs if the current path fails. The passive path is capable of reading only the LUN size, vendor, and
product information, but cannot perform any I/O operation.
Session: miguser
Example:
MPX200 <1> (miguser) #> show migration_luninfo
Index WWPN, PortId Symbolic Name Target Type
----- --------------------------------- -------------------- -------------
0 50:06:01:68:41:e0:18:94, 60-02-00 CX-320-B Src+Dest
1 50:06:01:68:41:e0:49:2e, 02-06-00 CX-340 Src+Dest
2 50:06:01:60:41:e0:18:94, 02-02-00 CX-320-A Source
3 20:78:00:c0:ff:d5:92:e5, 02-04-00 MSA-2012 Destination
Please select a Target from the list above ('q' to quit): 3
Index (LUN/VpGroup)
----- -------------
0 0/VPGROUP_1
1 1/VPGROUP_1
2 2/VPGROUP_1
3 3/VPGROUP_1
4 4/VPGROUP_1
5 0/VPGROUP_2
6 1/VPGROUP_2
7 2/VPGROUP_2
8 3/VPGROUP_2
9 4/VPGROUP_2
10 0/VPGROUP_3
11 1/VPGROUP_3
12 2/VPGROUP_3
13 3/VPGROUP_3
14 4/VPGROUP_3
15 0/VPGROUP_4
16 1/VPGROUP_4
17 2/VPGROUP_4
18 3/VPGROUP_4
19 4/VPGROUP_4
Please select a LUN from the list above ('q' to quit): 0
LUN Information
-----------------
WWULN 60:0c:0f:f0:00:d5:9c:a4:31:d4:a9:4a:01:00:00:00
LUN Number 0
VendorId HP
ProductId MSA2012fc
ProdRevLevel J200
Portal 0
Lun Size 10240 MB
Lun State Online
LUN Path Information
--------------------
Offline Data Migration330
To Next Page
Loading...
Need help?
General