4 MPX200 iSCSI configuration rules and
guidelines
This chapter describes the iSCSI configuration rules and guidelines for the MPX200.
iSCSI rules and supported maximums
The MPX200 chassis can be configured with one or two blades. Dual-blade configurations provide
for high availability with failover between blades, and are supported as redundant pairs only.
iSCSI-connected servers can be configured for access to one or both blades.
NOTE:
In the event of a failover between blades, servers with single-blade connectivity to a failed blade will
no longer have connectivity to the MPX200.
Table 3 lists the supported maximums.
MPX200 Multifunction Router 45
To Next Page
Loading...
Need help?
General