30
13.7
Installing Temperature Sensors and T/H Sensors (02312PBL)
Number of cabinets ≤ 6
Number of cabinets > 6
1. Bind the temperature sensors to the right
posts of the front and rear doors about 1.6
m above the floor using cable ties.
2. Install a T/H sensor base at the right
post position of the IT cabinet about 1.6
m high above the floor, and then clamp
the T/H sensor onto the base.
2. Install the device.
a. Install the cage nuts for guide rails, and then Install guide rails.
b. Install the cage nuts that secure the IVS1800.
c. Install mounting ears.
d. Install the IVS1800 in the cabinet.
3. Power on the device.
To Next Page
Loading...
Need help?
General