5
3
Installing a Cabinet
• Use a measuring tape to check that the
vertical distance between the top of the
2000 mm high cabinet and the floor is
2000 mm (+3 mm). Then use a level to
check that the cabinet is level.
• Do not remove the anchor bolts.
Otherwise, rework is required if the
cabinet height does not meet
requirements.
1. Determine the cabinet position based
on the engineering layout diagram.
2. Place the end cabinet at the correct
installation position.
3. Level the cabinet using a wrench.
4. Combine cabinets.
5. Install other cabinets in the same way.
To Next Page
Loading...
Need help?
General