IBM S85 pSeries 680 User Manual

Table 3. Firmware Checkpoints (continued)
Checkpoint Description Action/ Possible Failing FRU
E440 Validate NVRAM, initialize partitions
as needed
1. Verify that the system firmware
levels are at the current release
levels, update as necessary.
2. Replace service processor card if
problem persists.
Location: U0.1-P1-X1
See the note on page136.
E441 Generate /options node NVRAM
configuration variable properties
1. Verify that the system firmware
levels are at the current release
levels, update as necessary.
2. Replace service processor card if
problem persists.
Location: U0.1-P1-X1
See the note on page136.
E442 Validate NVRAM partitions 1. Verify that the system firmware
levels are at the current release
levels, update as necessary.
2. Replace service processor card if
problem persists.
Location: U0.1-P1-X1
See the note on page136.
E443 Generate NVRAM configuration
variable dictionary words
1. Suspect a system firmware
problem if problem persists.
Verify that the system firmware is
at current release level, update
downlevel system firmware.
See the note on page136.
E500 Configure remote I/O subsystem 1. Configure I/O subsystem
2. The appearance of this code
indicates that the I/O subsystem
configuration has started or
progressed to the point where
the code can be displayed.
See the note on page136.
Chapter 4. Checkpoints
153

IBM S85 pSeries 680 Specifications

General

Brand	IBM
Model	S85 pSeries 680
Category	Server
Language	English