(1) Block (2) Parking Brake
PARKING
TD2O515A
1.
Pull the parking brake lever (2) up
with the brake pedals depressed ful-
ly to engage the pedals with the la-
tch. If the braking force is insufcient,
depress the pedals more rmly.
2. Before leaving the tractor after
parking it, make sure to stop the
PTO, lower the implement onto the
ground, and stop the engine.
3. If it is necessary to leave the tractor
with the engine running, put all the
shift levers in the neutral position
and apply the parking brake rmly.
4. When parking the tractor on a
slope, stop the engine with the
parking brake applied and all gears
engaged in the low speed position.
5. If it is necessary to park the tractor
on a slope with the engine run-
ning, apply the parking brake and
chock(1) all four wheels.
6. To release the parking brake, de-
press the brake pedals rmly once
again.
WARNING
The brake pad can be rapidly
worn if you drive with the parking
brake applied.
Never park the tractor on a
steep slope in any circum-
stance. A severe accident can
occur.
•
•
WARNING
To avoid possible injury, death
or loss of property from a ma-
chine runaway:
With the engine off, the tractor
may move unexpectedly re-
ga r dle ss o f t h e g e ar s hif t
position. Before leaving the
tractor, certainly apply the
parking brake to prevent ma-
chine runaway.
※
Only H-shuttle model.
•
To Next Page
Loading...
Need help?
General
