Kioti DK4810 User Manual

57
7
-
11
MAINTENANCE
1. Check the engine oil daily.
2. Park the tractor on a level ground
and lower the implement.
3. If the engine was just running, wait
for approx. 5 minutes before che-
cking the oil level.
(1) Oil Filler Neck (2) Oil Dipstick
(A) Oil Level Is Acceptable Within This Range
td2O707A
td2O706A
CHECKING ENGINE OIL LEVEL (E)
4. Pull out the oil dipstick, clean it,
and then insert it into its original
position. Then, pull it out again and
check if the oil level is within the
specied range.
5. If the oil level is too low, add new
oil so that the level is within the al-
lowable range.
(1) Oil Dipstick
(A) Upper Limit (B) Lower Limit
IMPORTANT
When using oil of different
maker or viscosity from the
previous one, remove all of
the old oil. Never mix two dif-
ferent types of oil.
Do not start the engine when
the oil level is below lower limit.
Wip e the o il dipsti ck w it h
clean cloth or tissue. If foreign
material enters the oil sump, it
can lead to malfunction of the
engine.
Never add the oil over the up-
per limit.
•
•
•
•
CAUTION
To avoid injury:
Be sure to stop the engine be-
fore checking the oil level.
•
TD200-호주향-DK4810,5310,5810(HS)-011 11 2015-02-11 오후 3:01:21

Kioti DK4810 Specifications

General

Engine Power	48 hp
Engine Power (kW)	35.8 kW
Cylinders	3
Drive	4WD
Hydraulic System Type	Open Center
Lift Capacity	2, 425 lbs (1, 100 kg)
Engine Type	Diesel
3-Point Hitch Category	Category I

Summary

SAFETY AND VEHICLE DAMAGE WARNING

SAFETY PRECAUTIONS

PRECAUTIONS BEFORE OPERATION

SPECIFICATIONS

GENERAL SPECIFICATIONS

Comprehensive technical specifications of the tractor.

FUNCTION DESCRIPTION AND OPERATING TIPS

OPERATION

PRE-OPERATION CHECK

Routine checks to perform before starting tractor operation.

OPERATING THE ENGINE

Procedures for starting, stopping, and warming up the engine.

OPERATING THE TRACTOR

Instructions on how to drive and handle the tractor.

3-POINT HITCH IMPLEMENT AND LOADER OPERATION

REMOVAL AND INSTALLATION OF 3-POINT HITCH IMPLEMENT (INCLUDING CONNECTION OF UNIVERSAL JOINT)

Steps for attaching and detaching 3-point hitch implements.

OPERATION FOR 3-POINT HITCH IMPLEMENT MOUNTING COMPONENTS

Details on components for mounting 3-point hitch implements.

HANDLING LOADER

Instructions for the safe installation and use of the front loader.

MAINTENANCE

MAINTENANCE CHECK LIST

A list of items to check for regular maintenance.

LUBRICANTS

Recommended lubricants for various tractor parts.

MAINTENANCE CODE

STORAGE AND DISPOSAL

TRACTOR STORAGE

USING TRACTOR AFTER LONGTERM STORAGE

TROUBLESHOOTING

ENGINE TROUBLESHOOTING

TRACTOR TROUBLESHOOTING