td2O457A
TREAD
When working on a field where c are linearly aligned, the tread should be
adjusted so that the tires do not cross over the c. Also, it is necessary to in-
crease the tread to prevent any accident when working on a slope or trailing.
(1) Bolt (2) Rim bolt (3) Rim (4) Disc
WARNING
Never operate tractor with a loose rim, wheel, or axle.
Always tighten nuts or bolts to the specied torque.
Make sure to perform inspection daily.
•
•
To Next Page
Loading...
Need help?
General
