4. If the tension is incorrect, loosen
the alternator mounting bolts and,
using a lever placed between the
alternator and engine block, pull
the alternator out until the deec-
tion of the belt falls within accepta-
ble limits.
5. Be sure to retighten the alternator
mounting bolt and hinge bolt secu-
rely after adjusting belt tension.
6. Replace the fan belt if it is dama-
ged, cracked or worn.
Belt deection for
proper fan belt tension (A)
A deection of between
0.27 ~ 0.35 in. (7 ~ 9 mm)
td2O726A
(1) Battery
Mishandling the battery shortens the
service life and adds to maintenance
costs. If the battery is insufficiently
charged, the headlights may dim and
the engine is hard to start. It is impor-
tant to inspect the battery periodically.
1. The battery cable should always
be clean and firmly connected.
When installing a new or used bat-
tery, clean its terminals.
2. Check the battery and cable for
damage and corrosion.
BATTERY (W)
PRECAUTIONS FOR HANDLING
3. Apply grease to the terminals and
cable end in order to prevent cor-
rosion.
WARNING
The battery gas can explode. Do
not expose the battery to ames
or sparks. It may cause a re.
The battery uid contains sul-
furic acid that can burn you.
Do not allow the battery uid
to contact your eyes, skin, or
painted surfaces. If you acci-
dentally get it in your eyes or
on your skin, ush with water
and contact your doctor.
Be sure to wear eye protection
while working on the battery. The
battery uid can hurt your eyes.
Use only the battery with the
specified voltage. Otherwise,
it may cause a re.
•
•
•
•
CAUTION
To avoid injury:
Be sure to stop the engine be-
fore checking belt tension.
•
To Next Page
Loading...
