C56O140A
H11O682A
t66O122A
1. Consult your local KIOTI Dealer for
selection of the universal joint.
2. When selecting a universal joint,
make sure that it is not too short to
come off of the female and male
shafts at the highest position or too
long to impact its female and mail
shafts at the lowest position.
3. Move the joint back and forth to che-
ck that its lock pin is properly seated
to the groove of the PTO shaft.
(1) Universal Joint (1) Lock Pin
INSTALLING PTO SHAFT
WARNING
Never use any other part for
pulling except draw bar. Pul-
ling with top link, ROPS and
etc. will cause a fatal accident.
Be sure to install the auxiliary
safety chain when installing a
trailer.
Improper use of the draw-bar,
even if correctly positioned,
can cause a rear overturn.
Do not overload an attachment
or towed equipment. Use pro-
per counterweights to maintain
tractor stability. Hitch heavy
loads to the draw-bar only.
Make sure that there is no one
nor object between the tractor
and trailer.
•
•
•
•
•
To Next Page
Loading...
